MADE IN ITALY. Very high quality, Reasonable price for the quality offered.
This is very high quality three-component A+B+C sublimation coating, Made in Italy. Very easy to use.
PRODUCT DESCRIPTION
Three-component, transparent coating with acrylic-polyester nature, for the decoration of different kinds of materials, such as wood and plywood, metal, cups and mugs, tumbler , through sublimation…
APPLICATION FIELDS
Varnishing of manufactures that have to be subsequently treated through sublimation decoration.
This product is indicated for application onto wood, mugs, pre-varnished and not pre-varnished aluminium, and metals in general.
APPLICATION PROCESS
3-A Sublimation components (A+B+C) was created for spray or curtain coating application.
However other applications, such as roller coating, are not excluded; through these application techniques, it is NOT possible to assure an excellent final result.
TRANSFER CONDITIONS
Temperature |
Time |
||
|
30 sec. – 5 minutes (depending of material) |
The transfer time may vary, according to the kind and the thickness of the substrate.
SPRAY APPLICATION
APPLICATION:
Spray the varnish onto clean and degreased surfaces, in order to obtain a perfect adhesion onto the substrate.
It is recommended to use 1,2 - 1,4 mm diameter nozzles with at least a 4 atm pressure.
Recommended thickness: 40-50 μm
Pot-life at 20-25 °C: 4-5 hours
Mixture Rate: A:B:C - 2:1:1 ( 100ml A : 50ml B : 50ml C )
First Mix A+B, afterwards added and mix C.
Package include 3 components A+B+C, 3 bottles with total 200ml mixture.
Component A 100ml, Component B 50ml and Component C 50ml .Theoretical performance for thickness 40 μm: 1 L mixture - about 10 m2 ( with 200 ml mixture – about 2 m2 , for about 100 mugs)
DRYING:
Open air at 25-35° C
· Tack-free within 1 hour
· It may be handled after 6 hours
· Total hardening within 24 hours
Into oven at 80° C : 45 minutes (it is recommended a previous drying at room temperature for about 30 minutes).
GENERAL FEATURES
· Excellent “reception” of the sublimation
· High chemical/physical resistances
· Application versatility (indicated to different substrates)
· Excellent brightness
SPECIAL INSTRUCTIONS
· Always test the application characteristics, before starting production.
· Always check drying conditions.
· It is recommended to do preliminary tests, in order to determine the right transfer time and temperature.